- Products Status: Stock
- Application: Desktop and Laptop
- Type: Wired
- Kind: External
- Transmission Rate: 10/100/1000Mbps
- Interface Type: USB
- Model Number: UNW08-8153
- Place of Origin: Guangdong, China (Mainland)
- Chipset: ASIX 88179
Packaging & Delivery
|Packaging Details:||Colo Box|
Specificationsusb3.0 to 1000M Gigabit:
2.No need driver for WindowsXP/VISTA/7/8/8.1/Android(2.1,2.2,2.3,4.0)/MAC10.9 Above
Integrated 10/100/1000M Ethernet Controller for USB Applications
10/100/1000M Ethernet controller combines an IEEE 802.3u compliant Media Access Controller (MAC), USB 3.0 bus controller, and embedded memory. With state-of-the-art DSP technology and mixed-mode signal technology, high-speed transmission over CAT 5 UTP cable or CAT 3 UTP (10Mbps only) cable. Functions such as Crossover Detection and Auto-Correction, polarity correction, adaptive equalization, cross-talk cancellation, echo cancellation, timing recovery, and error correction are implemented to provide robust transmission and reception capabilities. JP508features embedded One-Time-Programmable (OTP) memory that can replace the external EEPROM (93C46/93C56/93C66/TWSI).
USB 3.0 to provide higher bandwidth and improved protocols for data exchange between the host and the device. USB 3.0 also offers more advanced power management features for energy saving.
Advanced Configuration Power management Interface (ACPI)—power management for modern operating systems that are capable of Operating System-directed Power Management (OSPM)—is supported to achieve the most efficient power management possible. In addition to the ACPI feature, remote wake-up (including AMD Magic Packet and Microsoft Wake-Up Frame) is supported in both ACPI and APM (Advanced Power Management) environments.
JP508supports Microsoft Wake Packet Detection (WPD) to provide Wake-Up Frame information to the OS, e.g., PatternID, OriginalPacketSize, SavedPacketSize, SavedPacketOffset, etc. WPD helps prevent unwanted/unauthorized wake-up of a sleeping computer.
JP508supports ‘RealWoW!’ technology to enable remote wake-up of a sleeping PC through the Internet. This feature allows PCs to reduce power consumption by remaining in low power sleeping state until needed.
Note: The ‘RealWoW!’ service requires registration on first time use.
JP508supports Protocol offload. It offloads some of the most common protocols to NIC hardware in order to prevent spurious wake-up and further reduce power consumption. JP508can offload ARP (IPv4) and NS (IPv6) protocols while in the D3 power saving state.
JP508supports the ECMA (European Computer Manufacturers Association) proxy for sleeping hosts standard. The standard specifies maintenance of network connectivity and presence via proxies in order to extend the sleep duration of higher-powered hosts. It handles some network tasks on behalf of the host, allowing the host to remain in sleep mode for longer periods. Required and optional behavior of an operating proxy includes generating reply packets, ignoring packets, and waking the host.
JP508supports IEEE 802.3az-2010, also known as Energy Efficient Ethernet (EEE). IEEE 802.3az-2010 operates with the IEEE 802.3 Media Access Control (MAC) Sublayer to support operation in Low Power Idle mode. When the Ethernet network is in low link utilization, EEE allows systems on both sides of the link to save power.
JP508is fully compliant with Microsoft NDIS5, NDIS6 (IPv4, IPv6, TCP, UDP) Checksum features, and supports IEEE 802 IP Layer 2 priority encoding and IEEE 802.1Q Virtual bridged Local Area Network (VLAN). The above features contribute to lowering CPU utilization, especially benefiting performance when in operation on a network server.
JP508is suitable for multiple market segments and emerging applications, such as desktop, mobile, workstation, server, communications platforms, docking station, and embedded applications.
Integrated 10/100/1000M transceiver
Auto-Negotiation with Next Page capability
Supports USB 3.0, 2.0, and 1.1
Supports LPM (Link Power Management)
Supports pair swap/polarity/skew correction
Crossover Detection & Auto-Correction
Supports Wake-On-LAN and ‘RealWoW!’ (Wake-On-WAN) Technology (see note 1)
Supports ECMA-393 ECMA ProxZzzy Standard for sleeping hosts (see note 1)
Supports power down/link down power saving
Transmit/Receive on-chip buffer support
Embedded OTP memory can replace external EEPROM
Built-in switching regulator and LDO regulator
Supports Customizable LEDs
Supports hardware CRC (Cyclic Redundancy Check) function
LAN disable with GPIO pin
Supports 25MHz or 48MHz external clock (from oscillator or system clock source)
SPI Flash Interface
48-pin QFN ‘Green’ package
Note 1. Select between RealWoW! or ECMA, only one feature can be active at a time.
Microsoft NDIS5, NDIS6 Checksum Offload (IPv4, IPv6, TCP, UDP) and Segmentation Task-offload (Large send v1 and Large send v2) support
Supports jumbo frame to 9K bytes
Supports Full Duplex flow control (IEEE 802.3x)
Fully compliant with IEEE 802.3 and IEEE 802.3u
Supports IEEE 802.1P Layer 2 Priority Encoding
Supports IEEE 802.1Q VLAN tagging
Supports IEEE 802.3az-2010 (EEE)
Microsoft AOAC (Always On Always Connected)
Supports 16-set 128-byte Wake-Up Frame pattern exact matching
Supports link change wake up
Supports Microsoft WPD (Wake Packet Detection)
Supports Protocol Offload (ARP & NS)
Intel CPPM (Converged Platform Power Management)
Supports L1 with 3ms BESL (USB 2.0)
Dynamic LTM messaging (USB 3.0)
Supports U1/U2 (USB 3.0)
Supports selective suspend
USB 10/100/1000M Ethernet on Motherboard, Dongle, Notebook, Docking station, or Embedded system